2026 Agenda
This agenda is subject to change.Â
Preliminary List of 2026 Papers
This is a preliminary list of papers accepted to present at this year’s conference. Please keep in mind that this collection is still subject to change and pending final approval.
- Scroll to see full list
- A Study on Circular Economy Transition in the Fashion Industry Through Business Model Innovation
- Additives in Plastic Manufacturing and Implications for Mechanical Recycling
- Addressing End-of-Life Drivetrain Failures in Wind Turbines Through Digital Product Passport-Enabled Remanufacture
- Advanced Techniques for Removing EV LIB Pack Lids
- Advancing Solvent-Based Recycling of Complex Post-Consumer Plastics
- Advancing the Recycling of Textiles via Mixed Fiber Classification and Separation
- AI for Smarter Remanufacturing: Predicting Core Value and Prioritizing Impact
- AI-Augmented Insights for Re-X
- Autonomous Battery Sorting and Disassembly: Addressing Critical Raw Material Scarcity in Modern Manufacturing
- Bio-Based Additive Manufacturing Using Enzymatically Recycled Cotton Textile Waste
- Circular Economy in the States: An Analysis of Current Policies, Standards, and Best Practices
- Circular Opportunity Mapping for Assured Life-Extension as a Service in the High Integrity Sector
- Cross-Industry Re-X: Upcycling Stamping/Blanking Scrap Metal into Chainmail Structural Systems
- Decision Support Framework for Circular Additive Manufacturing: Stamping Die Production and Repair
- Delamination Recycling of Multilayer Plastic Films
- Design for Reuse, Remanufacturing, Recovery, and Recycling in Puerto Rico
- Design of a Heated Twin-Screw Auger Conveyor for Solvent Removal in a Solvent-Based Plastic Recycling System
- Designing Materials Joining for Recovery
- Detection of Electrical Abuse in EV LIB Cells
- Different Strokes for Different Folks: A Spatial Analysis of Investments Needed to Increase the United States Post-Consumer Plastic Collection Rate
- Dissolution-Precipitation Recycling of Polyolefins
- Electrochemical Methods for the Recycling of Batteries and Electronic Waste
- Embracing Circular Economy: Innovative Approaches and Business Models in the HVAC Industry
- Enhanced Polymer Classification via CNN Analysis of Wavelet-Transformed MIR Spectra: From 1D Signals to 2D Scalogram Representations
- Evaluating the Circular Economy: An Inventory and Comparison with the Circularity Assessment Protocol
- Evaluating the Environmental Benefits of Methanolysis Processes for Polyester Textile Recycling
- Extending Product Lifecycles Through Remanufacturing: A Circular Economy Approach for Automotive Lighting
- Foams with High Recycled Content Enabled by Dynamic Crosslinking
- Image-Based Machine Learning for Component Identification for Remanufacturing
- Mechanochemical Conversion of Flexible PU Foam into Functional Additives for Circularity
- Modeling the Recycling Infrastructure, Flows, and Associated Greenhouse Gas Emissions Across the State of Connecticut
- Multi-Period Optimization of Multi-Agent Circular Economy Networks: Application to Single-Use Plastics and Textiles
- Powering a Second Life: Unlocking the Business Case for Battery Repurposing
- Practical Local Circular Economy Enablement via Fully Recoverable Reusable Delivery Packages
- Quantifying Value Chain Emissions: A Case Study at GKN Aerospace
- ReCreateIt: Transforming Plastic Waste Through Community-Led Manufacturing
- Recycled Polypropylene Raffia Waste for Injection Molding: Processability and Life-Cycle Impact
- Recycling of Packaging Material in the Home to Deliver Cost-Competitive Manufacturing Inputs, Empowering Householders to Contribute to and Benefit from the Circular Economy
- Recovery of Polyolefins from Landfill Samples for Property Evaluation and Variability Assessment
- Reducing Landfill Flows from Office Furniture: LCA of the Davies Reman Answer System
- Relative Role of Design for Re-X Methods, Renewable Energy, and Industrial Symbiosis in the Transition of the Chemicals and Materials Industry and Products to a Sustainable Circular Economy
- Reliability Model-Based Cost Computation Tool Applied to 4R Process
- Robotic Selective Disassembly of End-of-Life Cell Phones
- Scrap Rubber Devulcanization for Rubber Sustainability
- Single-Alloy Resealable Beverage Can
- Space Cooling: Recovery, Reuse, Recycling, and Supply Chain Impacts
- Sustainable Rotor Blades: Recyclable Resin Systems for Fiber and Matrix Recovery
- Techno-Economic Assessment of Artificial Intelligence-Enabled Sorting for Scalable Recycling of Spent Consumer Batteries in the United States
- Utilization of Aluminum Alloys Recycled from End-of-Life Vehicle Scrap
- Please note that additional papers are still under review.
Day 1 Agenda
Wednesday / 3.11.2026
8:00 AM
Registration & Continental Breakfast
9:00 AM
Welcome & Opening Remarks
Nabil Nasr
CEO, REMADE Institute
9:10 AM
Ellen MacArthur Foundation Welcome Remarks
Danielle Holly
Executive Lead, North America, Ellen MacArthur Foundation
9:20 AM
U.S. Department of Energy Welcome Remarks
Chris Saldana
Deputy Assistant Secretary, Office of Critical Minerals & Energy Innovation
9:20 AM
Special Recognition
Nabil Nasr
CEO, REMADE Institute
9:40 AM
Keynote Address
Circular Economy: Adding Value to Materials
Paul Ekins, PhD
Professor of Resources and Environmental Policy, University College London, Institute for Sustainable Resources (UK)
10:10 AM
Keynote Address
Electronics & the Circular Economy: The Future is Now
John Shegerian
CEO, ERI
10:40 AM
Break
11:00 AM
Track 1
Main Auditorium
Chemical & Solvent-Based Recycling
Session Chair:
David Shonnard
Michigan Technological University
Paper Title
Dissolution-Precipitation Recycling of Polyolefins
Presenter
Marina Tsianou
University at Buffalo, The State University of New York (SUNY)
Authors
University at Buffalo: Paschalis Alexandridis, Ali Ghasemi, Shikha Solanki
Track 2
NAS 120
Circular Economy
Building a Circular Economy for Products & Materials
Session Chair:
Barbara Reck,
Yale University
Paper Title
Sustainable Rotor Blades: Recyclable Resin Systems for Fiber & Matrix Recovery
Author
Emma Shafir
University of Applied Sciences Niederrhein, Germany
Authors
University of Applied Sciences Niederrhein, Germany: Michael Heber
Track 3
Lecture Room
Design for Re-X
Session Chair:
Magdi Azer,
REMADE Institute
Paper Title
Designing Materials Joining for Lightweighting
Author
Jeff Boyce
EWI
11:15 AM
Paper Title
Delamination Recycling of Multilayer Plastic Films
Presenter
Paschalis Alexandridis
University at Buffalo, The State University of New York (SUNY)
Authors
University at Buffalo: Jacob Licht, Marina Tsianou
Paper Title
Techno-Economic Assessment of Artificial Intelligence-Enabled Sorting for Scalable Recycling of Spent Consumer Batteries in the United States
Presenter
Dominic Aboagye
Pennsylvania State University
Authors
Pennsylvania State University: Gamini Mendis, Hariteja Nandimandalam, Hannah R. Esek, Mitchell Krovisky
Case Western Reserve University: Riley J. Donahue
UHV Technologies, Inc.: Isha Maun
Paper Title
Relative Roles of Design for Re-X Methods, Renewable Energy, & Industrial Symbiosis in the Transition of the Chemicals & Materials Industry to a Sustainable Circular Economy
Presenter
Aniket Mali
Arizona State University
Authors
Arizona State University: Bhavik Bakshi
11:30 AM
Paper Title
Advancing Solvent-Based Recycling of Complex Post-Consumer Plastics
Presenter
Elizaveta Radkevich
University of Wisconsin-Madison
Authors
University of Wisconsin-Madison: George Huber, Lily Callen, Charles Granger
Michigan Technological University: Fei Long, Ezra Bar-Ziv
Paper Title
Evaluation & Application of a Sustainable Nylon Resin – A Case Study on Components in Transportation Refrigeration Systems
Presenter
Yicheng Du
Trane Technologies
Authors
Trane Technologies: Veeraswami Dootha, Richard Jameson, Jenelle Shapiro, Shriya Deshkar
Paper Title
Design for Reuse, Remanufacturing, Recovery, & Recycling in Puerto Rico
Presenter
Yue Li
Northeastern University
Authors
Northeastern University: Jackson Smith, Dan J. Donnelly, III., Eugene S. Smotkin
Technology & Education Center for Renewable Energy, Puerto Rico: Eugene S. Smotkin
A3 Global: Jonathan Doan
11:45 AM
Paper Title
Design of a Heated Twin Screw Auger Conveyor for Solvent Removal in a Solvent-Based Plastic Recycling System
Presenter
Zach Wagner
Michigan Technological University
Authors
University of Wisconsin-Madison: George Huber, Charles Granger
Michigan Technological University: Fei Long, Ezra Bar-Ziv
Paper Title
Space Cooling: Recovery, Reuse, Recycling & Supply Chain Impacts
Presenter
Nina Khanna
Lawrence Berkeley National Laboratory
Authors
Lawrence Berkeley National Laboratory: Nihan Karali, Akshay Sharma, Nihar Shah
University of Wisconsin Madison: Charles Granger, Euncheol Ra, George Huber
15 Minutes of Q&A
12:00 PM
15 Minutes of Q&A
15 Minutes of Q&A
12:15 PM
Lunch
1:15 PM
Critical Mineral Panel Discussion
Recovering & Recycling Critical Minerals to Strengthen U.S. Supply Chain Resilience
Critical minerals are essential to modern life, powering everything from smartphones to vehicles to defense systems. In this session, industry innovators and other renowned expert panelists will discuss efforts across the U.S. and beyond to recover and recycle critical minerals, such as platinum group metals and rare earth elements, from end-of-life products, including electronics. Studies show that recovery and recycling of critical minerals could meet 40-60% — if not more — of the U.S’s demand by 2050.
TBD
John Shegerian
CEO, ERI
Chris York
VP of Business Development, Mint Innovation
Ben Kincaid
CEO, ReElement Technologies Africa
Mark Newton
Head of Corporate Sustainability, Samsung Electronics North America
2:15 PM
Fashion & Textiles Panel Discussion
Reweaving the System: Scaling Circular Innovation in Textiles
As textile circularity moves from pilot projects to real-world impact, scaling technology is critical to enabling a circular economy. This panel brings together innovators and industry leaders to explore what it takes to scale circular textile systems- from recycling and material innovation to digital infrastructure and supply-chain integration. Panelists will discuss key barriers, success factors, and the collaborations needed to turn circular solutions into industry-wide change.
Jennifer Lake
CEO, Goodwill of the Finger Lakes
Sarika Bajaj
CEO, Refiberd
Raymond Randall
Sr. Manager of Textile Recycling, WM
Matthew Allen
Head of North American Business Development, Reju
3:15 PM
Break
3:35 PM
Track 1
Main Auditorium
Mechanical Recycling
Mechanical Recycling of Plastics
Session Chair:
David Shonnard
Michigan Technological University
Paper Title
Foams with High Recycled Content Enabled by Dynamic Crosslinking
Presenter
Stephen Schmidt
Braskem America
Authors
Braskem America: Kim McLoughlin, Jayme Kennedy, Michelle Sing
Track 2
NAS 120
Circular Economy
Circular Economy Business Models & Approaches
Session Chair:
Fei Long
Michigan Technological University
Session Chair:
Barbara Reck,
Yale University
Paper Title
Circular Opportunity Mapping for Assured Life-Extension as a Service in the High Integrity Sector
Author
Halidu Abu-Bakar
University of Exeter Business School, UK
Authors
University of Exeter Business School, UK: Fiona Charnley
Track 3
Lecture Room
Innovations in Remanufacturing​
Assessing Core Value & Economics in Remanufacturing
Session Chair:
Mike Thurston,
RIT
Paper Title
AI for Smarter Remanufacturing: Predicting Core Value & Prioritizing Impact
Author
Umeshwar Dayal
Hitachi America, Ltd.
Authors
Hitachi America, Ltd.: Manish Gupta
3:50 PM
Paper Title
Mechanochemical Conversion of Flexible PU Foam into Functional Additives for Circularity
Presenter
Clarissa Clifton
Liquid Ion Solutions, LLC. (dba RoCo)
Authors
Liquid Ion Solutions, LLC. (dba RoCo): Hunaid Nulwala
Paper Title
AI-Augmented Insights for Re-X
Presenter
Edgard Ngaboyamahina
RTI International
Authors
RTI International: Thais Matha, Samantha Feinstein, Jacob Smith, Allison Lim
Case Western Reserve University: Riley J. Donahue
UHV Technologies, Inc.: Isha Maun
Paper Title
Reliability Model-based Cost Computation Tool Applied to 4R process (Robust Design, Repair, Remanufacture & Recycle)
Presenter
Fabrice Blasenhauer
Valeo SC2N
Authors
Valeo, France: Kevin Boissie
Valeo Brain, Germany: Thomas Illing
Valeo Brain, Ireland: Liam Garvey
4:05 PM
Paper Title
Recovery of Polyolefins from Non-Recyclable Waste for Property Evaluation & Variability Assessment
Presenter
Olaiya Niyi Gideon
University of Massachusetts-Lowell
Authors
University of Massachusetts-Lowell: Amir Ameli, Patrick Masembe, Nicholas Bowen, Davide Masato, Margaret J. Sobkowicz, Alexander Bishop
Idaho National Lab: Kris Egan, Ling Ding
Paper Title
Multi-period Optimization of Multi-agent Circular Economy Networks: Application to Single-use PET Plastics & Polyester Textiles
Presenter
Daniel Pert
Carnegie Mellon University
Authors
Carnegie Mellon University: Ana Inés Torres
Paper Title
Powering a Second Life: Unlocking the Business Case for Battery Repurposing
Presenter
Marie McNamara
Rocky Mountain Institute (RMI)
4:20 PM
Paper Title
Enhanced Polymer Classification via CNN Analysis of Wavelet-Transformed MIR Spectra: From 1D Signals to 2D Scalogram Representations
Presenter
Bassam Abdelghani
Michigan Technological University
Authors
Michigan Technological University: Saar Bar-Ziv, Ezra Bar-Ziv, Fei Long
Paper Title
Embracing Circular Economy: Innovative Approaches & Business Models in the HVAC Industry
Presenter
Debajyoti Maitra
Trane Technologies
Authors
Trane Technologies: Jenelle Shapiro, Tiffany Waymer, Cal Krause, Shannon Sajdak, Swathy Ramaswamy, Richard Jameson
Paper Title
Integrating Cyber-Physical Passports and Generative AI for Explainable RUL Estimation in Battery Remanufacturing
Presenter
Ragu Athinarayanan
Purdue University
Authors
Purdue University: Yanchao Tan, Xingyu Li, Ragu Athinarayanan
4:35 PM
15 Minutes of Q&A
15 Minutes of Q&A
15 Minutes of Q&A
4:50 PM
Transition Time Between Rooms
5:00 PM
Track 1
Main Auditorium
Recovery & Recycling
Emerging Textile & Fiber Recycling Technologies
Session Chair:
David Shonnard
Michigan Technological University
Paper Title
Advancing the Recycling of Textiles via Mixed Fiber Classification & Separation
Presenter
Paschalis Alexandridis
University at Buffalo, The State University of New York (SUNY)
Authors
University at Buffalo: Charutha Dassanayake, Johannes Hachmann, Brian Iezzi, Shea Myers, Shwetabh Tripathi, Marina Tsianou, Luis Velarde
Track 2
NAS 120
Circular Economy
Building a Circular Economy Regionally
Session Chair:
Fei Long
Michigan Technological University
Paper Title
Developing a Circular Textile Ecosystem through Multidisciplinary Collaboration & Partnership Building
Author
Kedron Thomas
University of Delaware
Track 3
Lecture Room
Recovery & Recycling
Recovery & Recycling of Electronics, Electric Vehicles, Metals, & Critical Minerals
Session Chair:
Bhavik Bakshi
Arizona State University
Paper Title
Autonomous Battery Sorting & Disassembly: Addressing Critical Raw Material Scarcity in Modern Manufacturing
Author
James Mynderse
Lawrence Technological University
Authors
Lawrence Technological University: David Gruzwalski, Amaya Pitts, Travis Bowman, Ahmed Khan Mohammed Zia, Gaurav Singh
Centrepolis Accelerator: Joseph LoGrasso, Dan Radomski, Pedro Guillen, Courtney Matheson
5:15 PM
Paper Title
Bio-based Additive Manufacturing Using Enzymatically Recycled Cotton Textile Waste
Presenter
Isabel Albelo
North Carolina State University - Wilson College of Textiles
Authors
North Carolina State University – Wilson College of Textiles: Sonja Salmon
Paper Title
ReCreateIt: Transforming Plastic Waste through Community-Led Manufacturing
Presenter
Charlotte Craff
re:3D, Inc.
Authors
re:3D, inc.: Samantha Snabes, Christopher Hong
Austin Habitat for Humanity: Britney Blann
Georgia Tech: Shristi Ghosh, Kyriaki Kalaitzidou, Andrew Beyer
University of Texas at Austin: Eesha Bilal, Yael Glazer, Michael Webber
University of Wollongong, Australia: Aziz Ahmed, Alireza Boostan, Khoi Nguyen
Western Sydney University, Australia: Phan Nguyen, Jojibabu Panta, Richard Yang, Tosin Famakinwa
Paper Title
Utilization of Aluminum Alloys Recycled from End-of-life Vehicle Scrap
Presenter
Manish Kumar Sinha
Worcester Polytechnic Institute
Authors
Worcester Polytechnic Institute: Brajendra Mishra
Phinix, LLC.: Subodh Das
Audubon Metals, LLC.: Matthew Gavin
Oculatus Consulting: Samuel Wagstaff
5:30 PM
Paper Title
Evaluating the Environmental Benefits of Methanolysis Processes for Polyester Textile Recycling
Presenter
Aurora del Carmen Munguia Lopez
University at Buffalo, The State University of New York (SUNY)
Authors
University at Buffalo: Abdulganiyu Ajalogun
Paper Title
Circular Economy in the States: An Analysis of Current Policies, Standards, & Best Practices
Presenter
Sean Trambley
U.S. Circular Economy Coaliton
Paper Title
Electrochemical Methods for the Recycling of Batteries & Electronic Waste
Presenter
Christian Modrzynski
DECHEMA Research Institute, Germany
Authors
DECHEMA Research Institute, Germany: Mark Melvin Pradja, Armin Leonhard, Sebastian Artur Held
5:45 PM
Paper Title
Improve Deinking Flotation of Water-Based Inks from Fundamental Studies
Presenter
Roe-Hoan Yoon
Virginia Tech
Authors
Virginia Tech: Kaiwu Huang, Sunjae Hong, Nasrin Samadiani, Alan Esker, Aaron Noble
Thiele Kaolin Company: Cesar Basilio, Serhat Keles
Paper Title
Practical Local Circular Economy Enablement Via Fully Recoverable Reusable Delivery Packages
Presenter
David Ruth
Motogo Systems
15 Minutes of Q&A
6:00 PM
15 Minutes of Q&A
15 Minutes of Q&A
6:15 PM
Poster Session & Networking Reception
7:45 pM
Adjourn Day 1
Day 2 Agenda
THURSDAY / 3.12.2026
8:00 AM
Registration & Continental Breakfast
9:00 AM
REMADE Presentation
Accelerating the Circular Economy in the U.S.
Nabil Nasr
CEO, REMADE Institute
9:25 AM
Ellen MacArthur Foundation Presentation
Growing the Circle: Partnerships, Technology and the Circular Economy at Scale
Sean Jones
Director of Circular Technology, Ellen MacArthur Foundation
9:50 AM
Keynote Address
From Resource Dependence to Circular Advantage: Australia’s Industrial Transition
Heinz Schandl, PhD
Senior Science Leader, Commonwealth Scientific & Industrial Research Organization (CSIRO), Australia
10:20 AM
Break
10:40 AM
Academic Research Panel Discussion
Universities: Driving America’s Innovation Leadership
In this session, academic researchers and university leaders from across the country will discuss how university-based research is the driving force for American innovation. Over the course of eight decades, universities and their research centers have grown to become economic and entrepreneurial engines, creating jobs and opportunities in communities across the country and ensuring America’s leadership in innovation around the world. Join us for this discussion as panelists provide their latest insights and share what’s in store for the years ahead.
TBD
Jonathan Dordick
Vice President, Strategic Alliances and Translation, Rensselaer Polytechnic Institute
Dr. Luna Lu
Director of Partnerships, Purdue University
Michael Oakes
Executive VP for Research & Economic Development, Case Western Reserve University
11:40 AM
Keynote Address
Accelerating Advanced Circular Business Models
Nancy Bocken
Professor in Sustainable Business, Maastricht Sustainability Institute, Maastricht University (Netherlands)
12:10 PM
Lunch
1:10 PM
Keynote Address
The Caterpillar Remanufacturing Journey - Where We’ve Been & Where We’re Going
Billy Frank
Vice President of Sales & Marketing, Caterpillar Reman
1:40 PM
Keynote Address
Contested Logistics & Circularity in DoD/DoW Textiles
Jeff Pacuska
Program Manager for Future Technology Integration, US Army DEVCOM-Soldier Center
2:05 PM
Transition Time Between Rooms
2:15 PM
Track 1
Main Auditorium
Recovery & Recycling
Recovery & Recycling of Packaging Materials
Session Chair:
David Shonnard
Michigan Technological University
Paper Title
Single-Alloy Resealable Beverage Can
Presenter
Daniel A. Zabaleta
Canovation
Authors
Canovation: Caleb Hayes, Jeff Grajewski
Track 2
NAS 120
Systems Analysis
Techno-Economic, Material Flow, & Life-Cycle Analysis
Session Chair:
Fei Long
Michigan Technological University
Paper Title
Additives in Plastic Manufacturing & Implications for Mechanical Recycling
Author
Pahola Thathiana Benavides
Argonne National Laboratory
Authors
Argonne National Laboratory: Ulises R. Gracida-Alvarez
Track 3
Lecture Room
Innovations in Remanufacturing​
Innovative Remanufacturing Technologies
Session Chair:
Bhavik Bakshi
Arizona State University
Paper Title
Extending Product Lifecycles through Remanufacturing: A Circular Economy Approach for Automotive Lighting
Author
Chelsea Jensen
Llink Technologies
Authors
Universidad EAFIT (Columbia): Paula Marcela Hernandez-Diaz, Laura M. Julio-Sanchez
2:30 PM
Paper Title
Recycling of Packaging Material in the Home to Deliver Cost Competitive Manufacturing Inputs Empowering Householders to Contribute to & Benefit from the Circular Economy
Presenter
Aldous Hicks
Lasso Loop Recycling, LLC.
Authors
Lasso Loop Recycling, LLC.: Phil Sanders, Robin Verbruggen, Tobias Van Eeckhout
Paper Title
Decision Support Framework for Circular Additive Manufacturing: Stamping Die Production & Repair
Presenter
Robert Tomkowski
KTH Royal Institute of Technology, Sweden
Authors
KTH Royal Institute of Technology, Sweden: Tugba Danaci, Sayyed Shoaib-Ul-Hasan, Amir Rashid, Indraneel Kulkarni, Nawra Widodo
Paper Title
Detection of Electrical Abuse in EV Lib Cells
Presenter
Nenad Nenadic
Rochester Institute of Technology
Authors
Rochester Institute of Technology: Ethan Kohrt, Mandlaenkosi Mthetwa
2:45 PM
Paper Title
Recycled Polypropylene Raffia Waste for Injection Molding: Processability & Life-Cycle Impact
Presenter
Andrés F. Rigail-Cedeño
ESPOL Polytechnic University, Ecuador
Authors
ESPOL Polytechnic University, Ecuador: Angie Medoza Lopez, Irina Ñacato Arias, Estephany Adrian, Génesis Malagón Vera
Universidad San Francisco de Quito, Ecuador: Sebastian Ponce
Paper Title
Evaluating the Circular Economy: An Inventory & Comparison with the Circularity Assessment Protocol
Presenter
Melissa M. Bilec
University of Pittsburgh
Authors
University of Pittsburgh: Amy L. Brooks, Erica Beigi, Rafaela Goncalves de Almedia
University of Georgia: Jenna Jambeck
Paper Title
Advanced Techniques for Removing EV Lib Pack Lids
Presenter
Nenad Nenadic
Rochester Institute of Technology
Authors
Rochester Institute of Technology: Abu Islam, Matthew DeHaven
3:00 PM
Paper Title
A Data-Driven Roadmap for Cost-Effective Reductions in Emissions, Waste, & Resource Use in Plastics: A Case Study of the Packaging Economy
Presenter
Farshid Nazemi
Arizona State University
Authors
Arizona State University: Bhavik Bakshi, Kevin Dooley
Aalborg University, Denmark: Fabio Sporchia
Paper Title
Modeling the Recycling Infrastructure, Flows, & Associated Greenhouse Gas Emissions Across the State of Connecticut
Presenter
Jean-Daniel Saphores
University of California, Irvine
Authors
University of California, Irvine: Craig Rindt
Yale School of the Environment: Barbara Reck, Ayushi Khan
Paper Title
Image Based Machine Learning for Component Identification for Remanufacturing
Presenter
Sri Priya Das
Rochester Institute of Technology
Authors
Rochester Institute of Technology: Abu Islam, Nenad Nenadic
CoreCentric Solutions: Audra Stapella, Sebastian Przybylski
3:15 PM
Paper Title
Different Strokes for Different Folks: a Spatial Analysis of Investments Needed to Increase the United States Post-Consumer Plastic Collection Rate
Presenter
Julien Walzberg
National Laboratory of the Rockies (NLR)
Authors
National Laboratory of the Rockies (NLR): Tapajyoti Ghosh, Alberta Carpenter
Aalborg University, Denmark: Fabio Sporchia
Paper Title
Quantifying Value Chain Emissions: A Case Study at GKN Aerospace
Presenter
Sayyed Shoaib-Ul-Hasan
KTH Royal Institute of Technology, Sweden
Authors
KTH Royal Institute of Technology, Sweden: Mohamed Rikaz Mohamed Ameer, Amal Valan Francis
GKN Aerospace Sweden AB, Sweden: Johanna Nylander
Georgia Tech: Shristi Ghosh, Kyriaki Kalaitzidou, Andrew Beyer
University of Texas at Austin: Eesha Bilal, Yael Glazer, Michael Webber
University of Wollongong, Australia: Aziz Ahmed, Alireza Boostan, Khoi Nguyen
Western Sydney University, Australia: Phan Nguyen, Jojibabu Panta, Richard Yang, Tosin Famakinwa
Paper Title
Addressing End of Life Drivetrain Failures in Wind Turbines through Digital Product Passport Enabled Remanufacture
Presenter
Stephen Fitzpatrick
National Manufacturing Institute, University of Strathclyde, Scotland
Authors
National Manufacturing Institute, University of Strathclyde, Scotland: Andreas Reimer, Calum Hicks, Patrick O’Neill, Scott Howie, Syed Munawar, Ashfaq Mohammad, Kedarnath Rane, Sampan Seth
3:30 PM
15 Minutes of Q&A
Paper Title
Reducing Landfill Flows Through Remanufacturing: An LCA of Davies Office Furniture Workspaces
Presenter
Allen Luccitti
Rochester Institute of Technology & New York State Pollution Prevention Institute
Authors
Rochester Institute of Technology & New York State Pollution Prevention Institute: Miko Buenk, Ava Labuzetta, Kimberly Bawden
Paper Title
Energy Security Via Bearing & Blade Remanufacturing Optimized by Hybrid Manufacturing with in Situ Volumetric Inspection
Presenter
Jason Jones
Hybrid Manufacturing Technologies
Authors
Worcester Polytechnic Institute: Brajendra Mishra
Phinix, LLC.: Subodh Das
Audubon Metals, LLC.: Matthew Gavin
Oculatus Consulting: Samuel Wagstaff
3:45 PM
15 Minutes of Q&A
15 Minutes of Q&A
4:00 PM
Closing Remarks
Nabil Nasr
CEO, REMADE Institute
4:10 PM
Adjourn Day 2